Displaying Images in the Calendar Screen
1.In the PLAY Mode, slide the zoom controller towards w (]) twice. This will display the calendar screen that shows the first image recorded on each day.
To display the first image recorded on a particular day, use [8], [2], [4], and [6] to move the selection boundary to the day you want and then press [SET]. To exit the calendar screen, press [MENU] or [BS] (^).
•If you save an image using any one of the following functions, the image will appear in the calendar on the date that you last saved it.
Dynamic Range, White Balance, Brightness, Keystone Correction, Color Restoration, Resizing, Cropping, Copy, Layout Print, MOTION PRINT
If you edit the date and time of an image, the image still will appear on the date it was originally recorded.
Using Image Roulette
1.With the camera turned off, hold down [4] and [p] (PLAY) until the
Image Roulette screen appears on the monitor screen.
The Image Roulette screen will cycle randomly through all the snapshots that are currently in memory and finally stop at one.
•To perform the Image Roulette operation again, press [4] or [6].
•To exit the Image Roulette screen, press [r] (REC) to enter the REC Mode or [ON/OFF] to turn off the camera.
•For a rotated snapshot (page 87), the Image Roulette screen shows the unrotated version.
•The camera will exit Image Roulette automatically if you do not perform the next Image Roulette operation within about one minute after the final image of the previous operation appears on the monitor screen.
•Note that Image Roulette works only with images shot with this camera. Image Roulette may not operate properly when other types of images are in memory.
•You can use Image Roulette only when [r] (REC) and [p] (PLAY) operations (page 130) are configured for “Power On” or “Power On/Off”.
74 | Viewing Snapshots and Movies |
|