Configuring World Time Settings (World Time)

Procedure

[MENU] * Set Up Tab * World Time

You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip, etc. World Time displays the current time in 162 cities in 32 time zones around the globe.

1.Use [8] and [2] to select “World” and then press [6].

•To change the geographic area and city for the time where you normally use the camera, select “Home”.

2.Use [8] and [2] to select “City” and then press [6].

•To change the “World” setting to summer time, use [8] and [2] to select “DST” and then select “On”. Summer time is used in some geographical areas to advance the current time setting by one hour during the summer months.

3.Use [8], [2], [4], and [6] to select the geographic area you want and then press [SET].

4.Use [8] and [2] to select the city you want and then press [SET].

Time Stamping Snapshots (Timestamp)

Procedure

[MENU] * Set Up Tab * Timestamp

You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot.

•Once date and time information is stamped into a snapshot, it cannot be edited or deleted.

Example: December 19, 2009, 1:25 p.m.

Date

2009/12/19

Date&Time

2009/12/19 1:25pm

Off

No stamping of date and/or time

 

 

•Even if you do not stamp the date and/or time with Timestamp, you can do so later using the DPOF function or some printing application (page 96).

•Digital zoom is disabled while date stamping is turned on.

•Date stamping is not possible for the following types of images.

–Images recorded with certain BEST SHOT scenes (Business cards and documents, White board, etc.)

127

Other Settings (Set Up)