Problem

Possible Cause and Recommended Action

 

Images cannot be

1)The USB cable may not be connected securely. Check all

 

transferred over a

connections.

 

USB connection.

2)If the camera is not turned on, turn it on.

 

 

3)Your computer may not be able to recognize the camera if

 

 

you connect via a USB hub. Always connect directly to the

 

 

computer’s USB port.

 

 

 

 

Language selection

1)You did not configure initial settings after purchasing the

 

screen appears

camera or the camera may have been left with a dead

 

when the camera is

battery. Check the camera setup (pages 25, 106).

 

turned on.

2)There may be a problem with the camera’s memory data. If

 

 

this is the case, perform the reset operation to initialize the

 

 

camera’s setup (page 109). After that, configure each

 

 

setting. If the language selection screen does not re-appear

 

 

when you turn the camera on, it means that the camera’s

 

 

memory management data has been restored.

 

 

If the same message appears after you turn power back on,

 

 

contact your retailer or a CASIO authorized service center.

 

 

 

 

There are various

The monitor screen shows indicators and other information

 

indicators and

about shooting conditions and the image you are recording.

 

values on the

You can touch the tab and then touch the “DISP” to select what

 

monitor screen.

information you want to include on the display (page 9).

 

 

 

 

The time and date

Load the camera’s battery and reconfigure the time and date

 

settings configured

settings (page 25). Do not remove the battery from the camera

 

the first time after

for at least 24 hours after configuring time and date settings.

 

purchasing the

After that, the settings will not be reset if you remove the

 

camera are reset to

battery.

 

their factory defaults

• If the time and date are reset to their factory default settings

 

when I remove the

when you remove the battery after it has been loaded for

 

camera’s battery.

more than 24 hours, it could mean that the camera’s setting

 

 

memory is defective. Contact your retailer or a CASIO

 

 

authorized service center.

 

Buttons are not

With large capacity memory cards there is a delay after the

 

responsive right

power has been turned on before the buttons become

 

after the power has

responsive.

 

been turned on.

 

 

 

 

129

Appendix