4.After the EV value is the way you want,

press [SET] to apply it.

The exposure compensation value you set remains in effect until you change it.

EV Shift Value

IMPORTANT!

•When shooting under very dark or very bright conditions, you may not be able to obtain satisfactory results even after performing exposure compensation.

NOTE

•You can also use the Panel (Operation Panel) (page 53) to change the EV shift setting.

•Performing an EV shift operation while using multi-pattern metering will cause the metering mode to switch automatically to center weighted metering. The metering mode will return to multi-pattern metering when you change the exposure compensation value to 0.0 (page 124).

•You can use the key customization feature to configure the [W] and [X] buttons so they control the metering mode setting (page 132). This comes in handy when adjusting exposure compensation while viewing the on-screen histogram (page 129).

119

ADVANCED SETTINGS