4.Use the zoom controller to zoom, and [S], [T], [W], and [X] to move around the zoomed image to display the part you want to extract.
5.Press [SET] to extract the displayed part and save it as a separate file.
•To exit the cropping procedure at any time before you press [SET], press [MENU].
IMPORTANT!
•Note that you cannot crop the following types of images.
–Snapshots created using MOTION PRINT
–Snapshots recorded with another camera
•The image produced by cropping a 3:2 or 16:9 image will have an aspect ratio of 4:3.
•Cropping cannot be performed if there is not enough memory to store the extracted image.
•The recording date of the extracted image will be the same as the recording date of the original snapshot.
Keystone Correction
Use the following procedure to correct the snapshot of a blackboard, document, poster, photograph, or other rectangular object that is out of square because it was recorded at an angle. Performing keystone correction on an image causes a new (corrected) 2M (1600 × 1200 pixels) size image to be stored as a separate file.
1.In the PLAY mode, display the snapshot you want to correct.
2.Press [MENU].
3.On the “PLAY” tab, select “Keystone” and then press [X].
This displays screen that shows all of the rectangular shapes in the image that qualify as candidates for keystone correction.
•Note that the above step is possible only when there is a snapshot displayed on the monitor screen.
155
EDITING IMAGES