Editing the Date and Time of an Image

Use the procedure in this section to change the date and time of a previously recorded image. This capability comes in handy when the current date and time are wrong due to the following reasons.

•Because the camera’s clock settings were not configured correctly when the image was recorded (page 12)

•Because the image was recorded using the wrong World Time zone (page 189)

1.In the PLAY mode, use [W] and [X] to display the image whose date and time you want to edit.

2.Press [MENU].

3.On the “PLAY” tab, select “Date/Time” and then press [X].

4.Set the date and the time you want.

To do this:

Do this:

Change the value at the cursor

Press [S] or [T].

location

 

 

 

Move the cursor between settings

Press [W] or [X].

 

 

Toggle between 12-hour and 24-

Press [BS].

hour timekeeping

 

 

 

5.When all the settings are the way you want, press [SET] to apply them.

•After editing the time and date, display the image to confirm that the date and time are correct.

159

EDITING IMAGES