(VGA 640 × 480 selected movie frame only. pixels)
1.In the PLAY mode, display the movie that contains the frame you want to use.
2.Press [MENU].
3.On the “PLAY” tab, select “MOTION PRINT”, and then press [X].
4.Use [S] and [T] to select either “9 frames” or “1 frame”.
5.Use [W] and [X] to scroll through the movie frames and search for the one you want to use as the image of the snapshot.
•Holding down [W] or [X] scrolls at high speed.
6.After displaying the movie frame you want, press [SET].
•If you selected “9 frames” in step 4, the camera will create a
•If you selected “1 frame” in step 4, the camera will create a snapshot of the frame you selected in step 6.
IMPORTANT!
•MOTION PRINT is not possible using a movie that was recorded on a different type of camera.
167
EDITING IMAGES