IMPORTANT!
•The icons listed below do not appear on the display while icon help is turned off.
–Focus mode 
icon (page 109)
–White balance AWB icon (page 120)
Using Mode Memory to Configure Power On Default Settings
You can configure the camera so it saves certain settings in “mode memory” whenever it is turned off, and restores the settings the next time you turn the camera back on. This keeps you from having to configure the camera each time you turn it off and on.
Selecting “Off” for a setting will cause that setting to return to its optimal default whenever the camera is turned off and then back on again. Selecting “On” will cause its setting when power is turned off to be restored when the camera is turned back on again.
The following lists all of the settings that can be configured with mode memory. The ones marked with an asterisk (*) have mode memory turned on (that is, their current setting is saved when the camera is turned off and restored when the camera is turned back on) as the initial factory default setting.
BEST SHOT, Flash*, Focus, White Balance, ISO, AF Area*, Metering,
135
ADVANCED SETTINGS