If you have problems installing the USB

driver...

You may not be able to install the USB driver properly if you use the USB cable to connect the camera to a computer running Windows 98SE/98 before installing the USB driver from the bundled CD-ROM, or if you have another type of driver installed. This will make it impossible for the computer to recognize the camera when it is connected. If this happens, you will need to reinstall the camera’s USB driver.

For information about how to re-install the USB driver, see the USB driver’s “Read me” file on the CD-ROM that comes bundled with the camera.

Display Messages

Battery is low. Battery power is low.

Cannot correct Keystone correction of the image cannot be

image!performed for some reason. The image will be stored as-is, without correction (page 101).

Cannot find the The image you specified with the slideshow

file.“Images” setting cannot be found. Change the “Images” setting (page 143) and try again.

Cannot register • You are attempting to save a BEST SHOT

any more files. scene when there are already 999 scenes in the “SCENE” folder (page 97).

•You are attempting to copy a FAVORITE file when the “FAVORITE” folder already contains 9999 files (page 176).

Card ERROR There is something wrong with the memory card. Turn off the camera, remove the memory card, and then reload it into the camera. If this message re-appears when you turn the camera back on, format the memory card (page 49).

IMPORTANT!

•Formatting the memory card deletes all its files. Before formatting, try transferring recoverable files to a computer or some other storage device.

B

 

APPENDIX

256