OTHER SETTINGS

To configure this operation:

Select this setting:

Power turns on when [] (REC) or

[] (PLAY) is pressed (but does not Power On turn off)

Power turns on or off when [ ]

Power On/Off

(REC) or [ ] (PLAY) is pressed

 

Power does not turn on or off when

[] (REC) or [] (PLAY) isDisable pressed

IMPORTANT!

•When “Power On/Off” is selected, pressing [] (REC) in the REC mode or [] (PLAY) in the PLAY mode turns off the camera.

•Pressing [] (REC) in the PLAY mode switches to the currently selected recording mode, and pressing

[] (PLAY) in the REC mode switches to the PLAY mode.

•When connecting the camera to a TV for viewing camera images, “Power On” or “Power On/Off” must be selected for the power on/off function.

NOTE

•The initial default setting is “Power On”.

Formatting Built-in Memory

Formatting built-in memory deletes any data stored in it.

IMPORTANT!

•Note that data deleted by a format operation cannot be recovered. Check to make sure you do not need any of the data in memory before you format it.

•Formatting built-in memory deletes the following.

—Protected images

—FAVORITE folder images

—BEST SHOT mode user setups

—Startup screen image

•Before starting the format operation, check to make sure that the camera’s battery is not low. Battery power going low during formatting can cause improper formatting and creates the risk of camera malfunction.

•Never open the battery cover while the format operation is being performed. Doing so creates the risk of camera malfunction.

157