VIEWING IMAGES ON A COMPUTER

2.Set the bundled CD-ROM into the CD-ROM drive of your computer.

•Use the CD-ROM whose contents label shows “USB driver”.

3.On the menu screen that appears, click “English”.

4.Click [USB driver B] and then [Install].

•This starts installation.

•Follow the instructions that appear on your computer screen to complete the installation.

•The following steps show installation under the English version of Windows.

5.When the final setup screen appears, click the [Exit] button on the CD-ROM menu to exit the menu, and then remove the CD-ROM from your computer.

•With some computer operating systems, a message prompting you to restart your computer may appear. If this happens, restart your computer. The CD-ROM menu will appear again after your computer restarts. Click the [Exit] button on the CD-ROM menu to exit the menu, and then remove the CD-ROM from your computer.

6.Connect the bundled AC adaptor to the [DC IN 5.3V] connector of the USB cradle, and then plug it in to a household power outlet.

•If you are using battery power without the AC adaptor, make sure that the battery is fully charged.

•Note that the shape of the AC adaptor depends on the area where you purchased the camera.

178