VIEWING IMAGES ON A COMPUTER
3.Press the camera’s power button to turn it on, and then press its [MENU] button.
4.Select the “Set Up” tab, select “USB”, and then press [].
5.Use [] and [] to select “Mass Storage (USB
6.Turn off the camera.
7.Place the camera onto the USB cradle.
•Do not place the camera onto the USB cradle while it is turned on.
[USB] button
[USB] lamp
8.Press the USB cradle’s [USB] button.
•Pressing the [USB] button enters the USB mode, which causes the USB cradle’s [USB] lamp to light green (page 213).
9.Your Macintosh will see the camera’s file memory as a drive.
•The appearance of the drive icon depends on the Mac OS version you are using.
•Your Macintosh will see the camera’s file memory as a drive whenever you establish a USB connection between the camera and your Macintosh.
10.
186