OTHER RECORDING FUNCTIONS
■Specifying the Auto Focus Area
You can use the following procedure to change the Auto Focus area used in the Auto Focus mode and the Macro mode. Note that the configuration of the focus frame changes in accordance with the Auto Focus area you select.
1.In the REC mode, press [MENU].
2.On the “REC” tab, select “AF Area”, and then press [].
3.Use [] and [] to select the Auto Focus area you want, and then press [SET].
For this type of Auto Focus area: | Select this: | |
Very limited range in the center of the |
|
|
screen |
| Spot |
| ||
• This setting works well with focus lock |
| |
|
| |
(page 79). |
|
|
Automatic selection of the focus area where the subject closest to the camera is located
•With this setting, a wide focus frame, which contains nine focus points, appears on the monitor screen first. When you
press the shutter button half way, the |
| Multi |
camera automatically selects the focus |
|
|
point where the subject closest to the |
|
|
camera is located, and a focus frame |
|
|
appears at that point. |
|
|
•This setting works well for group photos.
• |
| Spot | • |
| Multi |
Focus frame | Focus frame |
75