PLAYBACK

5.Use [￿] and [￿] to display the frame that you want to use as the main image.

•Holding down either button scrolls at high speed.

6.After selecting the frame you want, press [SET].

•This displays the resulting still image.

•If you selected “9 frames” for the layout, the frame you selected in step 4 will be the main image, and the frames on either side of it will be used as the background frames.

•If you selected “1 frame” in step 4, an image of the frame you selected in step 6 appears here.

IMPORTANT!

•MOTION PRINT is not possible for movies not recorded with this camera.

Displaying the 9-image View

The following procedure displays nine images on the monitor screen at the same time.

1.In the PLAY mode, shift the zoom controller towards ().

•This displays the 9-image screen with the image that was on the monitor screen in step 2 in the center, with a selection boundary around it.

•If there are fewer than nine images in memory, they are displayed starting from the upper left corner. The selection boundary is located at the image that was on the display before you switched to the 9-image view.

•On the 9-image screen, indicates a voice recording file (page 100).

127