Casio EX-Z600 manual 147

PLAYBACK

2.Turn off the camera.

3.Set the camera onto the USB cradle.

4.Turn on the TV and select its video input mode.

5.Press [] to turn on the camera, and then perform the required operation for playback.

IMPORTANT!

•Make sure that “Power On” or “Power On/Off” is selected for the camera’s power on/off functions (page 167) when you connect to a TV to view images.

•All icons and indicators that appear on the monitor screen also appear on the TV screen.

•Note that the audio output is monaural.

•Pressing the USB cradle’s [PHOTO] button will activate the Photo Stand feature (page 141) and display images on the TV screen.

•Depending on the size of the TV screen, recorded images may not fill the entire screen.

•For video output, the audio volume level is initially set to maximum. Perform volume level adjustment using TV controls.

•After using an optionally available AV cable (EMC- 3A) to connect the camera’s USB cradle connector directly to the AUDIO IN terminal of a TV, you can view recorded images on the TV and even use the TV screen to compose images before recording them.

NOTE

•You can use the camera’s USB cradle to connect to a DVD recorder or video deck and record images from the camera. The following explains how to use the bundled AV cable.

—DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals.

—USB cradle: Connect to the [AV OUT] (AV output port)

—Camera: Place onto the cradle

You can play a slideshow of snapshots and movies on the camera and record it on a DVD or video tape. You can record movies by selecting “ Only” for the slideshow “Images” setting (page 139). When recording images to an external device, use [￿] (DISP) to clear all indicators from the monitor screen (page 30).

147 B