VIEWING IMAGES ON A COMPUTER

Using the Camera with a Macintosh Computer

The following are the general steps for viewing and copying files from a Macintosh.

You can find details about each operation in the procedures that follow below. Note that you should also refer to the documentation that comes with your Macintosh for other information about USB connections, etc.

IMPORTANT!

•This camera does not support operation on a computer running Mac OS 8.6 or lower, or Mac OS X 10.0. If you have a Macintosh running Mac OS 9 or OS X (10.1, 10.2, 10.3 or 10.4), use the standard USB driver that comes with your OS.

1.Use the USB cradle to establish a connection between the camera and your Macintosh.

2.View and copy the images you want.

IMPORTANT!

•If you want to transfer files from the camera’s built-in memory to a computer, make sure there is no memory card loaded in the camera before you place it onto the USB cradle.

1.Connect the bundled AC adaptor to the [DC IN 5.3V] connector of the USB cradle, and then plug it in to a household power outlet.

•If you are using battery power without the AC adaptor, make sure that the battery is fully charged.

•Note that the shape of the AC adaptor depends on the area where you purchased the camera.

194