PRINTING IMAGES
To configure print settings for a single image
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab,
select “DPOF”, and then press [].
3.Use [] and [] to select “Select images”, and then press [].
4.Use [] and [] to display the image you want.
5.Use [] and [] to specify the number of copies.
•You can specify up to 99 for the number of copies. Specify 00 if you do not want to have the image printed.
6.To turn on date stamping for the prints, press [BS] so “On” is displayed.
•“On” indicates that date stamping is turned on.
•Turning on date stamping while “00” is specified for the number of copies will
cause the number of copies to change to “01”. Any other number of copies setting will remain the same when you turn on date stamping.
•To turn off date stamping for the prints, press [BS] so “Off” is displayed.
•Repeat steps 4 through 6 if you want to configure other images for printing.
7.After all the settings are the way you want, press [SET] to apply them.
178