OTHER RECORDING FUNCTIONS
Using Manual Focus
With the Manual Focus mode, you can adjust the focus of an image manually. The following shows focus range in the Manual Focus mode.
Optical Zoom Factor | Approximate Focus Range |
1X | 15cm (5.9˝) to infinity (∞) |
|
|
3X | 40cm (15.7˝) to infinity (∞) |
|
|
• Using optical zoom causes the above range to change.
1.In the REC mode, press [MENU].
2.Select the “REC” tab, select “Focus”, and then press [].
3.Use [] and [] to
select “
”, and then press [SET].
•At this point, a boundary also appears on the display, indicating the part of the image that will be used
for manual focus. | Boundary |
4.Press [SET].
5.While watching the
image on the monitor screen, use [] and [] to focus.
| Manual focus position | |
|
|
|
To do this: | Do this: |
|
Focus in on the subject | Press []. |
|
|
|
|
Focus out on the subject | Press []. |
|
|
|
|
•Pressing [] or [] causes the area inside of the boundary displayed in step 1 to fill the monitor screen momentarily to aid in focus. The normal image will reappear a short while later.
•If you do not adjust the focus of the enlarged image, it will return automatically to step 3. If this happens and you still want to adjust the focus, press [SET] to display the enlarged image again.
6.Press the shutter button to record the image.
| 79 |
| B |
|
|
|
|