OTHER RECORDING FUNCTIONS

Using Continuous Shutter

You can configure the camera to record only a single snapshot each time the shutter button is pressed, or to keep recording as long as the shutter button remains depressed. You can select from among the following three continuous shutter modes.

•Normal-speed continuous shutter

You can continually record images until memory becomes full.

•High-speed continuous shutter

Record up to three consecutive images at high speed.

•Flash continuous shutter

Use this mode to record up to three consecutive images, firing the flash for each one.

1.In the REC mode, press [MENU].

2.Select the “REC” tab, select “Continuous”, and then press [￿].

3. Use [￿] and [￿] to

select “Normal Speed”, “High Speed”, or “Flash Cont. ”, and then press [SET].

•This causes the applicable icon to appear on the monitor screen.

: Normal-speed Continuous Shutter : High-speed Continuous Shutter

: Flash Continuous Shutter

•With “Off”, snapshots are recorded one at a time.

IMPORTANT!

•Turning off the camera automatically turns off the Continuous Shutter Mode.

86