Changing the USB Port Protocol
You can use the procedure below to change the USB communication protocol that is used when exchanging data with a computer, printer, or other external device. Select the protocol that suits the device to which you are connecting.
1.Press [MENU].
2.On the “Set Up” tab, select “USB” and then press [X].
3.Use [S] and [T] to select the setting you want and then press [SET].
When you want to connect to this type | Select this | |
of device: | setting: | |
Computer or a printer that supports USB |
| |
| ||
With this setting, the computer sees the | Mass Storage | |
camera as an external storage device. | ||
(USB DIRECT- | ||
Use this setting for normal transfer of | ||
PRINT) | ||
images from the camera to a computer | ||
| ||
(using the bundled Photo Loader with |
| |
HOT ALBUM application). |
| |
|
| |
Printer that supports PictBridge (page |
| |
PTP | ||
This setting simplifies the transfer of | (PictBridge) | |
image data to the connected device. |
| |
|
|
B | 170 | OTHER SETTINGS |
|
| |
|
|
|