Viewing and Storing Images on a Macintosh
You can view and store images (snapshot and movie files) on your Macintosh by connecting to the camera.
IMPORTANT!
•Connection is not supported to a Macintosh running Mac OS 8.6 or lower, or Mac OS X 10.0. Connection is supported to a Macintosh running Mac OS 9 or OS X (10.1, 10.2, 10.3, 10.4) only. Use the standard USB driver that comes with the operating system for connection.
■Connecting the Camera to Your Macintosh the First Time
1.Make sure the camera’s battery is fully charged.
2.Turn on the camera, and then press [MENU].
•It makes no difference whether the camera is in a REC mode or the PLAY mode.
3.Select the “Set Up” tab, select “USB”, and then press [X].
4.Use [S] and [T] to select “Mass Storage”, and then press [SET].
5.Turn off the camera, and connect the USB cable that comes bundled with the camera to the camera’s USB/AV connector and your computer’s USB port.
200
USING THE CAMERA WITH A COMPUTER