■Battery Power Conservation Features
This camera is equipped with a sleep function and auto power off function to conserve battery power. You can configure these settings in the REC mode as described below.
Feature | Description | Settings | |
Name | |||
|
| ||
| The monitor screen turns off (goes | 30 sec | |
| into a sleep state) if no operation is | ||
| 1 min | ||
Sleep | performed for a preset amount of | ||
2 min | |||
| time. Press any button to turn the | ||
| Off | ||
| monitor screen back on. | ||
|
| ||
|
|
| |
Auto Power | Power turns off if no operation is | 1 min | |
performed for a preset amount of | 2 min | ||
Off | time. | 5 min | |
| |||
|
|
|
•Sleep and Auto Power Off always operate as described below in the PLAY mode, regardless of their current PLAY mode settings.
–Sleep does not function in the PLAY mode.
–The Auto Power Off trigger time is always five minutes.
1.Press [MENU].
2.Use [W] and [X] to select the “Set Up” tab.
3.Use [S] and [T] to select the item you want to
configure (“Sleep” or “Auto Power Off”) and then press [X].
4.Use [S] and [T] to select the sleep or Auto
Power Off trigger time and then press [SET].
Selecting “Off” for the sleep setting disables the sleep feature.
NOTE
•When both sleep and Auto Power Off have the same time settings, Auto Power Off takes priority.
•Sleep and Auto Power Off are disabled under the following conditions.
–When there is a connection between the camera and computer or other device
–During Voice Recording playback or recording
–During movie recording and playback
43
GETTING READY