Using the easy Mode

The easy mode eliminates troublesome setups. This mode is recommended for those who are new to digital imaging.

1.In the REC mode, press [SET].

2.Use [S] and [T] to select the second option from the bottom (easy mode).

3.Use [W] and [X] to select “ ON” and then press [SET].

This enters the easy mode.

4.Focus the image.

While the focus frame is aligned with the subject, half-press the shutter button.

5.Shoot the image.

When the image is focused, press the shutter button the rest of the way.

NOTE

•You also can change the easy mode setting using the menu that appears when you press [MENU] (pages 49, 214).

■Using the easy Menu

The easy menu contains flash, self-timer, and image size settings, plus an item for exiting the easy mode.

While the camera is in the easy mode, all the other settings (besides Self-timer, Image Size, and easy Mode) on the REC tab menu (page 214) and Quality tab menu (page 215) are fixed at preset optimum values. Any settings you configured on these tabs are not used in the easy mode.

IMPORTANT!

•To use the Set Up tab menu (page 216), you need to exit the easy mode. To do this, select the “easy Mode” item in

step 2 of the following procedure, and then select in step 3. After that, you can use the Setup tab menu as you

normally do.

64

SHOOTING A SNAPSHOT