NOTE

•The indicator “1sec” appears on the monitor screen between Triple Self-timer shots. How long it takes for the camera to get ready to shoot again after it shoots an image depends on the image size and quality settings, whether or not a memory card is loaded in the camera, and the flash charge condition.

•You cannot use the any self-timer to shoot with continuous shutter mode.

•The Triple Self-timer cannot be used when performing the following recording operations.

–Recording with certain BEST SHOT scenes (Business Cards and Documents, Whiteboard, etc., Old Photo, Movie)

Using Continuous Shutter

You can configure the camera to record only a single snapshot each time the shutter button is pressed, or to keep recording as long as the shutter button remains depressed (and there is enough memory available to store the images).

1.In the REC mode, press [MENU].

2.On the “REC” tab, select “Continuous” and then press [X].

3.Use [S] and [T] to select “On” and then press [SET].

This causes “ ” to appear on the monitor screen.

•With “Off”, the snapshots are recorded one at a time.

4.Press the shutter button to shoot.

•Images continue to be shot as long as you keep the shutter button depressed. Releasing the shutter button stops shooting.

77

SHOOTING A SNAPSHOT