PLAYBACK

To re-record audio

1.In the PLAY mode, use [￿] and [￿] to scroll through snapshots until the one whose audio you want to re-record is displayed.

2.Press [MENU].

3.Select the “PLAY” tab, select “Dubbing”, and then press [￿].

4.Use [￿] and [￿] to select “Delete”, and then press [SET].

•If you merely want to delete the audio without re- recording, press [MENU] here to complete the procedure.

5.Press the shutter button to start audio recording.

6.Recording stops after about 30 seconds or when you press the shutter button.

•This deletes the existing audio and replaces it with the new one.

IMPORTANT!

•Take care that you do not block the

microphone with your

 

fingers.

 

 

• Good recording results

 

are not possible when

 

the camera is too far

 

from the subject.

 

• The

(Audio) icon

Microphone

appears on the monitor

 

screen after audio

 

recording is complete.

 

•You will not be able to record audio when remaining memory capacity is low.

•You cannot add audio to the following types of images.

—Movie images and the voice recording file icon

—Images created with MOTION PRINT

—Protected snapshot (page 161)

•Audio that is re-recorded or deleted cannot be recovered. Make sure you no longer need audio before re-recording or deleting it.

153