USING A MEMORY CARD

4.Use [￿] and [￿] to select “Built-in Card”, and then press [SET].

•This starts the copy operation and displays the message “Busy.... Please wait...”.

•After the copy operation is complete, the monitor screen shows the last file in the folder.

To copy a specific file from a memory card to built-in memory

1.Perform steps 1 through 3 of the procedure under “To copy all the files in built-in memory to a memory card”.

2.Use [￿] and [￿] to select “Card Built-in”, and then press [SET].

3.Use [￿] and [￿] to select the file you want to copy.

4.Use [￿] and [￿] to select “Copy”, and then press [SET].

•This starts the copy operation and displays the message “Busy.... Please wait...”.

•The file reappears on the monitor screen after the copy operation is complete.

•Repeat steps 3 through 4 to copy other images, if you want.

182