OTHER RECORDING FUNCTIONS

3.Press [SET] to select the aperture value (page 28) in the exposure panel, and then use [￿] and [￿] to change the setting.

5.When the image is focused, press the shutter button all the way down to record.

NOTE

Aperture value*

Wide Small

F2.8, F4.0

• You can also perform the following operation in the

M mode (manual exposure).

Depth of Field

Shallow

 

Deep

 

*The above values are full wide angle optical zoom. Aperture values are different at other optical zoom settings.

•If you are using manual focus (page 80), you can also press [SET] to select “FOCUS” (manual focus

setting) (page 28) in the exposure panel, and then use [￿] and [￿] to focus manually.

4.Press the shutter button half way.

•This causes the camera to adjust focus automatically.

•If the image is over-exposed or under-exposed, the shutter speed and aperture setting shown on the monitor screen will turn amber when you press the shutter button half way.

1. Press [SET] to select the exposure mode (page

28) in the exposure panel.

2. Use [￿] and [￿] to select “S” (shutter speed

priority AE) or “A” (aperture priority AE).

3. Set the aperture (if you selected “S” above) or

shutter speed (if you selected “A”), and the other

setting will be configured automatically.

• While the “S” or “A” mode is selected, you can press

[SET] to select “EV shift” (page 28) in the exposure

panel, and then use [￿] and [￿] to adjust the EV shift

value (page 83).

88