BASIC IMAGE RECORDING
Flash Unit Status
You can find out the current flash unit status by pressing the shutter button half way and checking the monitor screen and red operation lamp.
Red operation lamp*
The 
indicator is also shown on the monitor screen when the flash unit is ready to fire.
* Red operation lamp
When the red operation | It means this: | |
lamp is this: | ||
| ||
Flashing | Flash unit is charging | |
Lit | Flash unit is ready to fire |
Changing the Flash Intensity Setting
Perform the following steps to change the flash intensity setting.
1.In a REC mode, press [MENU].
2.Use [] and [] to select the “Quality” tab.
3.Use [] and [] to select “Flash Intensity”, and then press [].
4.Use [] and [] to select the setting you want, and then press [SET].
To make flash intensity: | Select this setting: |
|
|
Stronger+2
+1
Normal0
Weaker–2
IMPORTANT! 
•Flash intensity may not change if the subject is too far or too close to the camera.
66