Casio EX Z 33 Time Stamping Snapshots (Timestamp), Use, Off, Date, Procedure, Date&Time, 5.Press [SET], [MENU] * Set Up Tab * Timestamp

2.Use [8] and [2] to select “City” and then press [6].

•To change the “World” setting to summer time, use [8] and [2] to select “DST” and then select “On”. Summer time is used in some geographical areas to advance the current time setting by one hour during the summer months.

3.Use [8], [2], [4], and [6] to select the geographic area you want and then press [SET].

4.Use [8] and [2] to select the city you want and then press [SET].

5.Press [SET].

IMPORTANT!

•Before configuring World Time settings, make sure that the Home City setting is the place where you live or normally use the camera. If it isn’t, select “Home” on the screen in step 1 and configure the Home City, date, and time settings as required (page 108).

Time Stamping Snapshots (Timestamp)

Procedure

[MENU] * Set Up Tab * Timestamp

You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot.

•Once date and time information is stamped into a snapshot, it cannot be edited or deleted.

Example: December 19, 2010, 1:25 p.m.

Date	2010/12/19
Date&Time	2010/12/19 1:25pm
Off	No stamping of date and/or time

•Even if you do not stamp the date and/or time with Timestamp, you can do so later using the DPOF function or some printing application (page 83).

•Digital zoom is disabled while date stamping is turned on.

107 Other Settings (Set Up)