Snapshot Tutorial

Using the Control Panel

The Control Panel can be used to configure camera settings.

1. In the REC mode, press [SET].

[8] [2] [4] [6]

This will cause a Control Panel to appear along the right

 

side of the monitor screen. The settings available for the

 

currently selected Control Panel also appear. You can

 

use the control panel to configure various camera

 

settings.

 

• If “On” is selected for the Panel setting (page 104), the

 

Control Panel is always displayed along the right side

[SET]

of the monitor screen.

2.Use [8] and [2] to select the setting you want to change.

1Image size/Quality* (pages 30, 64)

Available settings

Control Panel

2Flash (page 33)

 

 

 

 

 

 

 

 

 

 

 

 

 

1

3Face detection (page 35)

 

 

 

 

 

 

 

2

4Anti shake (page 36)

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

5ISO sensitivity (page 37)

 

 

 

 

 

 

 

4

6White balance (page 37)

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

7EV shift (page 39)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8easy Mode (page 40)

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

 

8

9Date/Time (page 42)

 

 

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

*Snapshot image quality cannot be changed using the Control Panel.

3.Use [4] and [6] to change the setting.

4.If you want to configure another setting, repeat steps 2 and 3.

5.After all of the settings are the way you want, press [SET]. This will apply the settings and return to the REC mode.

NOTE

•You also can configure settings other than those listed above (page 52).

•The Control Panel cannot be displayed while an easy Mode, For YouTube, or Voice Recording Operation is in progress.

29

Snapshot Tutorial