Casio EX Z 33 manual 46

NOTE

•Spending a long time using movie recording will cause the camera to become slightly warm to the touch. This is normal and does not indicate malfunction.

•The camera also records audio. Note the following points when shooting a movie.

– Take care that the microphone is not blocked by your fingers, etc.

	– Good recording results are not possible when the camera
	is too far away from what you are trying to record.
	– Operating camera buttons while shooting can cause
	button noise to be picked up in the audio.
		Microphone
•	Shooting a very bright subject can cause a vertical band to
	appear in the monitor screen image. This does not indicate
	malfunction. The band will not be recorded in a snapshot, but will be recorded in
	the case of a movie.
•	Use of certain types of memory cards increase the time it takes to record movies,
	which can cause movie frames to be lost. This condition is indicated by » and Y
	flashing on the monitor screen. To avoid loss of movie frames, use of a memory
	card with a maximum transfer speed of at least 10MB per second is recommended
	(page 125).
•	Only digital zoom can be used for zooming during movie recording. Since optical
	zoom is not possible while recording a movie, zoom as required before pressing

[0] to start recording.

• The effects of camera movement in an image become more pronounced when you shoot close up or with a large zoom factor. Because of this, use of a tripod is recommended under these conditions.

• Auto Focus and Macro Focus become fixed focus while shooting a movie (page 54).

46Recording Movie Images and Audio