Using Flash (Flash)

1. In the REC mode, press [2] (

) to

 

Flash

select the flash setting you want.

 

 

 

Each press of [2] (

) cycles through

 

 

the available flash settings.

 

 

 

 

• If “On” is selected for the Panel setting

 

 

(page 104), you can change the flash

 

 

setting by pressing [2] (

) once,

[2] (

)

using [4] and [6] to select the setting, and then pressing [SET].

> Auto Flash

Flash fires automatically in accordance with exposure

(amount of light and brightness) conditions.

 

?Flash Off Flash does not fire.

Flash always fires. This setting can be used to brighten a

<Flash On subject that normally comes out dark due to daylight or backlight (daylight synchro flash).

¥ Red Eye

Flash fires automatically. This type of flash can be used to

reduce the chance of redness in the subject’s eyes.

 

2.Press the shutter button to shoot.

<indicates the flash will fire.

Back lamp

Flashes orange while the flash is charging to indicate that image recording is disabled.

You will not be able to take another flash snapshot until the lamp stops flashing orange, which indicates that charging is complete.

• For information about Flash Range, see page 139.

33

Snapshot Tutorial