Viewing Snapshots and Movies on a TV Screen

1.Use an optionally available AV cable (EMC-4A) to connect it to the TV.

Yellow

White

AV cable

TV

Video Audio

 

AUDIO IN jacks (white)

USB/AV port

VIDEO IN jack (yellow)

Making sure that the mark on the AV cable connector is towards the lens side, connect the cable to the camera.

• Make sure that you insert the cable connector into the USB/ AV port until you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.

Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.

2.Turn on the TV and select its video input mode.

If the TV has more than one video input, select the one where the camera is connected.

3.Press [p] (PLAY) to turn on the camera.

This will cause an image to appear on the TV screen, without anything appearing on the camera’s monitor screen.

Pressing [ON/OFF] or [r] (REC) will not turn on the camera while the AV cable is connected.

You also can change the aspect ratio of the screen and the video output system (page 111).

70

Viewing Snapshots and Movies