10.Using Screen Receiver to Display the Calculator Screen Image on

Your Computer

This section explains how to connect an fx-9860G calculator to a computer and display the calculator screen image on the computer.

Important!

•Check to make sure that the operating system version of the fx-9860G calculator is 1.02 or greater. If it isn’t, you will need to update your operating system. For details, see the information about updating the operating in the readme.txt file on the fx-9860G Manager PLUS CD-ROM.

•A USB driver install dialog box will appear the first time you connect the fx-9860G calculator to your computer with the USB cable. Follow the instructions that appear on the dialog box. Screen Receiver will not operate properly if you cancel the install operation.

kConfiguring fx-9860G Communication Settings

Before you can connect the calculator to your computer, you first need to perform the following procedure and configure the calculator’s communication settings.

To configure the fx-9860G calculator communication settings

1. From the Main Menu, enter the LINK mode.

2. Press $(CABL).

• This displays the Select Cable Type screen.

3. Press !(USB).

4. Press &(CAPT).

• This displays the Capture Set Mode screen.

5. Press #(OHP).

•This displays the screen shown nearby, which indicates that the setup procedure is complete.

E-39