12-3-2

Performing a Data Communication Operation

k Performing a Data Transfer Operation

Connect the two units and then perform the following procedures.

Receiving unit

To set up the calculator to receive data, press 2(RECV) while the data communication main menu is displayed.

The calculator enters a data receive standby mode and waits for data to arrive. Actual data receive starts as soon as data is sent from the sending unit.

Sending unit

To set up the calculator to send data, press 1(TRAN) while the data communication main menu is displayed.

This displays the send data type selection screen.

•{MAIN} ... {main memory data}

•{SMEM} ... {storage memory data}

20050401