— 5 —
Octave shift setting and keyboard range
Operation 2
The MIDI messages listed in the following table are transmitted when completing the setting operation.
The setting affects only on the currently selected MIDI channel. First select the desire MIDI channel
before changing settings.
Selecting a MIDI channel
1. Press the MIDI button.
The display shows the current MIDI channel, eg. "C01" means Channel 1.
2. Using the 10-key, enter a number from 1 to 16.
Changing Program Change / Control Change
Control change
MIDI Message Setting Operation
Program change 1. Reffering to the tone number list on the panel, find the 3-digit tone
number you desire.
2. Press the tone button.
3. Using the 10-key, enter the 3-digit number.
Volum
e
1. Press the MIDI button and repeat it until "voL" appears on the display.
2. Using the 10-key, enter a 3-digit number from 000 to 127.
Pa
n
1. Press the MIDI button and repeat it until "PAn" appears on the display.
2. Using the 10-key, enter a 3-digit number from 000 to 127.
Expression 1. Press the MIDI button and repeat it until "EPS" appears on the display.
2. Using the 10-key, enter a 3-digit number from 000 to 127.
Effect depth 1. Press the MIDI button and repeat it until "EFt" appears on the display.
2. Using the 10-key, enter a 3-digit number from 000 to 127.
Fine tun
e
1. Press the MIDI button and repeat it until "tUn" appears on the display.
2. Using the 10-key and the - key, enter a 2-digit number from -50 to 50.
Transpose 1. Press the MIDI button and repeat it until "trn" appears on the display.
2. Using the 10-key and the - key, enter a 2-digit number from -12 to 12.
All notes of
f
1. Press the MIDI button and repeat it until "Ano" appears on the display.
"SUr" and "Ano" will appear alternately on the display.
2. Press the + key.
3. Press the + key again to transmit the message.
All sounds off 1. Press the MIDI button and repeat it until "ASo" appears on the display.
"SUr" and "ASo" will appear alternately on the display.
2. Press the + key.
3. Press the + key again to transmit the message.
Reset all controller
s
1. Press the MIDI button and repeat it until "rAC" appears on the display.
"SUr" and "rAC" will appear alternately on the display.
2. Press the + key.
3. Press the + key again to transmit the message.
C4 (60)
-21 0 -1
Octave range when set to -2
Octave range when set to -1
Octave range when set to 0
Octave range when set to 1