Selecting a Sound Effect Set

The four sounds that make up the sound effect set you select are assigned to the four sound effect pads. See “Sound Effect List” on page A-2 for a list of available sound effect sets and their contents.

To select a sound effect set

1. Press the SE SET button.

Flashing dial icon

Sound effect set selection screen indicator

Current sound effect set setting

2. Rotate the dial left or right to cycle through the available sound effect sets until the one you want is displayed.

3. After you are finished, you can press another button to change to another mode.

Selecting a Drum Set

The four sounds that make up the drum set you select are assigned to the four drum pads. See “Drum Set List” on page A-2 for a list of available drum sets and their contents. Note that there are three basic types of drum sets.

Auto Drum Sets

Selecting “A0 : Auto” causes drum pad assignments to change automatically to match the rhythm you select (page E-15).

Preset Drum Sets

Selecting any one of the preset drum sets (P1 to P7) assigns the sounds for that drum set to be assigned to the drum pads.

User Drum Sets

Selecting a user drum set (U1 or U2) assigns sounds defined by you using the procedure under “Configuring a User Drum Set” on page E-21.

E-20

272A-E-022A

LD50_E_14-22.p65

Page 20

02.10.28, 11:19

Adobe PageMaker 6.5J/PPC

Page 22
Image 22
Casio LD50 manual Selecting a Sound Effect Set, Selecting a Drum Set, To select a sound effect set