Casio PA-2400W manual Pathname of requested file, 12\*.dat d\casio\*.* \casio data

Title Command FLCE /R

This command uses a pathname request to specify file that exists on the communication partner side, then receive the file.

If an identical file name exists in the reception directory of the PA-2400W, it will be overwritten.

If the directory that is specified as the reception directory does not exist, it will be automatically created. The progress of file transfer will be displayed.

All other operations which must follow conditions at the communication partner, refer to Chapter 7.8 “Conditions at Communication Partner”.

￿C Language Interface￿

Calling Sequence￿

	FLCE /R[<Option>] <Request file pathname> [<Request file pathname >] [...] <Reception directory
	pathname>
￿	(Parameters in [ ] can be omitted.)

Parameters￿

Option O: Specification of forced overwrite of a read-only file

If this option is specified, even read-only file will be overwritten.

If an overwrite is attempted on read-only file and this option is not specified, this command will be abnormally terminated.

R: Recursive call

All files that exist under the directory specified by the transmission file pathname are used as the objective of file transfer. If the specified directory has any sub-directories, they will also be included in the destination directories for file transmission.

Even if this option is specified, the transmission file pathname should be specified by full pathname.

Pathname of requested file

Specify an objective file of reception that exists on the communication partner side by its full pathname.

To specify all files enter "*.*" as file name. A wild card can be used for file name.

Directory names or file names can be described using 2-byte code characters.

Specify a pathname of requested file according to the naming rules of the communication partner-side OS. Refer to Chapter 7.8 “Conditions at Communication Partner”.

Destination directory pathname

As the last input parameter of this command describe the destination directory name of the communication partner side.

If specified directory does not exist, it will be automatically created by the specified name.

￿Enter a "\" as the delimiter of the directory name. If not, it will result a parameter error.

Directory names can be described by using 2-byte code characters.

	Example “\”	Root directory specification
	“\casio\12\”	Sub-directory specification
￿	“\casio”	Incorrect specification
Startup￿Examples￿
FLCE /R	"a:\12\*.dat" "d:\casio\*.*" "\casio data\"

This transfers all files under the "12" directory of drive A: of the communication partner side which

have a "dat" extension and all files under the "casio" of drive D: to the "casio data" directory of the

￿PA-2400W.

FLCE /RR "a:\12\*.dat" "d:\casio\*.*" "\casio data\"

This transfers all files under the "12" directory (including the sub-directories) of drive A: of the communication side which have a "dat" extension and all files under the "casio" directory (including the sub-directories) of drive D: to the "casio data" directory of the PA-2400W.

60