9.5Pan (0AH)

Format

Message Format: BnH 0AH vvH

n:MIDI Channel Number

vv:Value (Note1)

Note 1:

For information about the relationship between setting values and send/receive values, see "25.5 Pan Setting Value Table" in "Part VII Setting Values and Send/Receive Values".

Send

This message is sent at initialization.

Receive

Receipt changes the pan setting of the corresponding part.

9.6Expression (0BH)

Format

Message Format: BnH 0BH vvH

n:MIDI Channel Number

vv:Value

Send

This message is not sent by this Instrument.

Receive

Receipt changes the Expression value.

9.7General Use Controllers 1 through 8 (10H through 13H, 50H through 53H)

These messages are used to control DSP operation.

Format

Message Format:

BnH 10H vvH

DSP Parameter7[0]

 

BnH 11H vvH

DSP Parameter7[1]

 

BnH 12H vvH

DSP Parameter7[2]

 

BnH 13H vvH

DSP Parameter7[3]

 

BnH 50H vvH

DSP Parameter7[4]

 

BnH 51H vvH

DSP Parameter7[5]

 

BnH 52H vvH

DSP Parameter7[6]

 

BnH 53H vvH

DSP Parameter7[7]

 

 

 

 

 

 

n:

MIDI Channel Number (Note1)

 

 

 

 

vv:

Value

 

 

 

 

Send

 

This message is not sent by this Instrument.

 

Receive

Receipt change the value of Parameter7 [0-7] (7-Bit Parameter) explained under "21.3 DSP Parameter".

Any message received that corresponds to the parameter of a number not being used by the currently selected DSP is ignored.

11