Part II

Channel Message

4 Receive Channel

The channel number of the channel message received by each part is shown in the table under "1.4.2 Part Block".

The channel number of a channel message that changes the settings of a DSP coincides with the channel of the part that is using the DSP.

5 Send Channel

Basically, the MIDI channel of the channel message sent when the Instrument is played coincides with the MIDI channel of the part being played. Note, however, that the MIDI channel of the performance information that corresponds to the keyboard main part is the Keyboard Channel setting value.

6 Note Off

Format

Message Format: 9nH kkH 00H (receive only) 8nH kkH **H

n: MIDI Channel Number

kk:Key Number

**: Ignored

Send

Sent when something is played on the keyboard.

Receive

Received over MIDI channels that correspond to each part. A part that is turned off by the Part Enable Parameter value explained under "20.7 Part Parameter" is not received. The velocity value is ignored.

7 Note On

Format

Message Format: 9nH kkH vvH

n:MIDI Channel Number

kk:Key Number

vv:Velocity

Send

Sent when something is played on the keyboard.

Receive

Received over MIDI channels that correspond to each part. A part that is turned off by the Part Enable Parameter value explained under "20.7 Part Parameter" is not received.

8