Note 1: Received values and parameter setting values

The range of the value of each DSP Parameter 7 array element depends on the selected DSP or array number.

Unlike manipulation of a DSP parameter using a System Exclusive Message, a value received by this control change message is always a value from 0 to 127, but the value is changed in accordance with the setting range of the applicable parameter setting. Because of this, it is impossible for a value to be outside of the range of the applicable parameter setting.

Conversion from the value received with the message to the parameter setting value is performed can be represented in general terms by the expression shown below.

ParameterSettingValue=ParameterMinimumValue+(ParameterMaximumValue-ParameterMinimumValue)⋅ Received Value 127

For details about Parameter 7 of each DSP, see the explanations under "Part VI DSP Parameter List".

9.8Hold1 (40H)

Format

Message Format: BnH 40H vvH

n:MIDI Channel Number

vv:Value

Send

Sent when a pedal that has a sustain (damper) function is operated.

Receive

Receipt performs an operation equivalent to a sustain (damper) pedal operation.

Timbre Type Specific Operation

This operation differs in accordance with the Timbre Type (see "11.1 About the Timbre Type") setting.

•Timbre Type: Melody

Sustain off/on control is performed in accordance with the value of the received message. For information about the relationship between setting values and send/receive values, see the "25.1 Off/On Setting Value Table" in "Part VII Setting Values and Send/Receive Values" of this document.

•Timbre Type: Piano

Continuous control of the piano tone decay rate and the decay rate of Acoustic Resonance effect resonance is performed in accordance with the value of the received message.

•Timbre Type: Drum

The received message does not affect sound source operation.

Acoustic Resonance

When a part that is using Acoustic Resonance receives this message, the resonance characteristics of Acoustic Resonance are continually altered in accordance with the message value.

9.9Sostenuto (42H)

Format

Message Format: BnH 42H vvH

n:MIDI Channel Number

vv:Value (Note1)

Note 1:

For information about the relationship between setting values and send/receive values, see the "25.1 Off/On Setting Value Table" in "Part VII Setting Values and Send/Receive Values" of this document.

12