Casio AP-200, PX-120 20.4System Reverb Parameter, 20.5System Acoustic Resonance Parameter, 20.6Brilliance Parameter, Note 1:, Note 1:, Note 2:, Note 3:, Note 4:, Note 1:

20.4System Reverb Parameter

Parameter	ID	R/W	Block	Size	Array	Min-Def-Max	Description
Cancel	003C	R/W	000000	1	01	00-00-01	0...Normal
							1...Cancel
Type	003D	R/W	000000	7	01	00-04-0F	1	- 16 (Note1)
Feedback	003E	R/W	000000	7	01	00-40-7F	0	- 127
Er Level	003F	R/W	000000	7	01	00-40-7F	0	- 127
Damp	0040	R/W	000000	7	01	00-40-7F	0	- 127
Tone	0041	R/W	000000	7	01	00-7F-7F	0	- 127

Note 1:

Selects the System Reverb preset type. Receipt of GM/GS Reset selects Hall2.

This type is also linked to System Reverb parameters, and to the System Reverb Return Level parameter, and its setting causes these parameters to change to prescribed values.

For details about the preset type list, see "25.7 Reverb Type Setting Value Table".

20.5System Acoustic Resonance Parameter

Parameter	ID	R/W	Block	Size	Array	Min-Def-Max	Description
Cancel	001B	R/W	000000	1	01	00-00-01	0...Normal
							1...Cancel
Tuning	001C	R/W	000000	7	01	00-40-7F	-100-0-+99(cent)(Note1)
Damper Pedal	001D	R/W	000000	7	01	00-00-7F	0 - 127 (Note2)
Wet Level Min	0025	R/W	000000	16	01	0000-1333-7FFF	0x0000	- 0x7FFF (Note3)
Wet Level Max	0026	R/W	000000	16	01	0000-5800-7FFF	0x0000	- 0x7FFF (Note4)
Low Boost Freq	0027	R/W	000000	16	01	0000-2000-4000	0x0000	- 0x4000
Low Boost Level	0028	R/W	000000	16	01	0000-4000-7FFF	0x0000	- 0x7FFF
High Cut Freq	0029	R/W	000000	16	01	0000-4000-7FFF	0x0000	- 0x7FFF

Note 1:

Changing this parameter configures the Tuning setting of System Acoustic Resonance.

When the Instrument's Master Fine Tune setting is changed, this parameter is reset to the Master Fine Tune value.

Note 2:

Changing this parameter performs a Damper Pedal operation on System Acoustic Resonance.

When the Damper Pedal parameter of the part being used by System Acoustic Resonance is manipulated, this parameter is reset to the manipulated Damper Pedal depth.

Note 3:

The value is set when the damper pedal is completely released.

Note 4:

The value is set when the damper pedal is completely depressed.

20.6Brilliance Parameter

Parameter	ID	R/W	Block	Size	Array	Min-Def-Max Description
Type	0047	R/W	000000	7	01	00-00-01	0...For Speaker
							1...For Phones
Mid6 Gain	0055	R/W	000000	7	01	00-0C-18	-12 - 0 - +12(Brilliance)(Note1)

Note 1:

Selects Master EQ mid 6 (Brilliance) gain. See "25.11 Brilliance Gain Setting Value Table".

35