Casio RJA514733-9 To remove the tape cartridge from the printer

8.Load the tape cartridge into the printer.

•Make sure that the tape and ink ribbon pass between the print head the rubber roller as shown in the illustration below. Take care that the ink ribbon does not snag on the protrusion near the print head. Press down on the tape cartridge until you hear it click securely into place.

Important!

•Installing the tape cartridge improperly or failing to secure it properly in place can cause the ribbon to break.

Rubber roller

Tape

Ink ribbon	Print head
Tape
	Make sure
	these lines
	are
	parallel.
Protrusion

9.Close the cassette cover.

•Press down on the cassette cover until you hear it click securely into place.

•After loading the tape cartridge in the printer, never pull on the tape or try to push the tape back into the cartridge.

To remove the tape cartridge from the printer

1.Press to turn off the printer.

2.Press the cassette cover release and open the cover.

3.Grasping both sides of the tape cartridge, lift is straight up.

E14