General Guide
Press to turn on power.
Display
Press to turn off power.
Keyboard 
Cassette cover
Positioning guide
Helps to ensure that discs are inserted correctly.
Slit *
Cassette cover release
USB port | Carrying handle |
For connection of a USB cable when |
|
exchanging data with a computer. |
|
| Battery cover |
AC adaptor terminal
Connect the bundled
AC adaptor here.
Print Head Release Button Hole
Perform the following steps to release the print head when you cannot remove a disc from the printer due to printer malfunction. Normally, you should not use the following procedure to release the print head. Use this procedure only when the print head fails to release normally due to malfunction.
1.Insert a thin object* into the hole and press.
•This will cause the print head to release the disc so you can remove it from the printer.
2.Remove the disc from the printer (page 21).
3. Open the cassette cover and press the release lever as shown
*The right end of the slit becomes a “tape outlet” when a tape cartridge is loaded in the printer.
in the illustration nearby.
• Note that you will not be able to print again if the release lever is in the raised position.
*Use an object that is at least 30mm
E4