Casio RJA514733-9 GINS” setting, To exit the printing operation, ■To exit the printing operation, ■To cut a tape when “NONE” is selected for the “MAR

■To create margins to the left and right of label text

1.Before text is printed or after text printing is complete, press FUNCTION

FEED.

• This feeds the tape approximately 23.5 millimeters (15/16").

■To cut a tape when “NONE” is selected for the “MAR-GINS” setting

Automatic tape cutting is not performed at the end of printing when NONE is selected for the margins setting (User’s Guide, page 27). Perform the following step to cut the tape manually.

1.After printing is complete, press FUNCTION CUT.

Important!

•Make sure that the printer is level when performing a tape cut operation. Also, do not pull on the tape or open the cassette cover.

■To exit the printing operation

1.When the screen shown above is on the display, use and to select EXIT, and then press SET twice.

•This will display the initial TAPE mode screen.

•See page 54 of the User’s Guide for information about using the STORE option on the above screen.

E26