Getting Started

This chapter shows how to setup the cash register and get it ready to operate. Please read this chapter even if you have used a cash register before.

1. Load the memory protection batteris and Paper rolls

Load the two memory protection batteries

1.Remove the printer cover and open the platen arm (receipt side).

2.Remove the battery compartment cover.

printer cover

 

battery compartment cover

 

 

 

platen arm

3. Note the (+) and (–) markings in the battery compartment. Load a set of two new alkaline batteries so that their positive (+) and negative (–) ends are facing as indicated by the markings.

No battery is included in the accessories.

4. Replace the battery compartment cover.

5. Close the platen arm and replace the printer cover.

Important!

These batteries protect information stored in your cash register's memory when there is a power failure or when you unplug the cash register. Be sure to install these batteries.

WARNING!

Never try to recharge the batteries supplied with the unit.

Do not expose batteries to direct heat, let them become shorted or try to take them apart.

Keep batteries out of the reach of small children. If your child should swallow a battery, consult a physician immediately.

E10