Character manual input
This chapter shows the procedures to program department / PLU descriptors, store messages, key descriptos, report title, total descriptor (such as gross total, net total...) and clerk name.
The characters you entered by the character keyboard or
The “Entering characters” section shows how to enter characters, and the “Programming descriptors and messages by entering characters” shows how to program the entered characters to each memory.
Entering characters
In this section, the method to enter descriptors or messages (characters) to the cash register during programming is described.
Characters are specified by character keyboard or by multi tapping method. In the first half of this section, the usage of character keyboard is described. In the latter half, inputting method by multi tapping is described.
Using character keyboard
8 9
CAPS
SHIFT
1 | 2 | 1 |
1 | DBL | A |
6SIZE
2 | 7 |
| F | |
|
|
| ||
3 |
|
| K | |
| 8 |
|
| |
4 |
| 3 | P | |
9 | SPACE | |||
|
| |||
|
|
|
45
5 |
| C | DEL | U |
| 0 |
| ||
|
|
|
|
1Alphabet keys
Used input to characters.
2Double size letter key
Specifies that the next characters you input to double size characters. After completion of inputting double size character, press this key for normal size character.
3Space key
Set a space by depression.
4Clear key
Clears all input characters in the programming.
B |
| C | D | E |
| |
a | b | c | d | e |
| |
G |
| H | I | J | Z | |
f | g | h | i | j | z | |
L |
| M | N | O | 6 | |
| SUBTOTAL | |||||
k | l | m | n | o | ||
| ||||||
Q |
| R | S | T | 7 | |
|
| |||||
p | q | r | s | t | CA | |
V |
| W | X | Y | AMT | |
v | TEND | |||||
u | w | x | y |
|
6Program end key
Terminates the character programming.
7Character enter key
Registers the programmed characters.
8CAPS key
Pressing this key shifts the character from the lowercase letter to upper case letter.
9Shift key
Pressing this key shifts the character from the uppercase letter to lower case letter.
Advanced Operations and Setups
5Delete key
Clears the last input character, much like a back space
key.
Example:
Input “ | A | p | p l e | J | u | i c e ”, |
enter | <DBL><A> <DBL><Shift><p> | <p> <l> <e> | <Space> <CAPS><J> | <Shift><u> <i> <c> <e> . |