Getting Started

9. Select watermark on receipt.

Turn the mode switch to “PGM”, enter <0> or <1>, and press the <CH> , <ST>

Example: no watermark

2

0hs

with watermark

2

1hs

10. For Australian GST

1.Turn mode switch to X mode.

2.Enter 01012001, press <ST>.

3.Press <CA>. (If you want to cancel this procedure, press <ST> instead of <CA>.)

X

OFF

RF

PGM

Z

X2/Z2

PGM

601012001s 6 a

Mode Switch

After completion of this procedure, the “GST system was changed” message was printed on receipt and;

1Tax symbol (*) is printed.

2 Taxable amount is skipped.

3 “GST INCLUDED” is set to the TX1 descriptor.

4 “TAXABLE AMT” is set to the TA1 descriptor.

5 Total line is printed even in direct (cash) sale.

6 Australian rounding is set.

7 “$” is set to the monetary symbol.

8 Print “MOF message” on receipt.

9 Tax (10% tax rate, add-in tax, fraction round off) is set to the tax table 1. No data is set to other tax tables.

0 The taxable amount and tax amount except TA1/TX1 are not printed on report.

A Restriction (to 0, 5) on last amount digit of cash sales, received on account, paid out, and money declaration.

NOTE:

After completion of register programming, enter 6200and sin the PGM 7 mode (PGM mode ⇒ 7s) to backup the program data into the internal non-volatile memory.

(This opration takes about 30 seconds.)

E16