Advanced programmings and registrations

Advanced registrationsEnabling clerk assignment

By assigning a clerk, clerk number or name will be printed on receipts. The following operation enables the register to use the clerk assignment.

Step

Operation

 

 

 

1 Turn the Mode switch to PGM position. The display shows programming top menu.

2 Using ?and >keys, select [System Setting] and press Fkey. [System Setting] is the last column on the programming top menu and is not shown on the first screen.

Keep pressing >key until it appears on the screen.

3 Enter 3from ten key pad then press okey. This operation sets the register in program mode.

4 Enter 2722from ten key pad and press o key. Number 2722 is the program code for clerk assignment setting.

5 Enter 4and eight zeros from the ten key pad then press Fkey. Number 400000000 is the set code to enable clerk assignment.

If you wish to disable the clerk assignment feature later on, perform these steps and enter nine zeros in this step.

6 Press okey to complete the setting.

3o

2722o

400000000F

o

You can also program for enabling clerk operations by detail setting program. Please see page E-75 “Set code 27”.

E-48