Advanced programmings and registrations

Programming functions of departments and PLUs individuallyProgramming functions of departments individually

This part explains programming methods of each function of departments indi- vidually.

Step

1 Turn the Mode switch to PGM position and select [System Setting] then press Fkey.

2 Enter 3and press okey to set the register in the programming mode.

3 Referring the following table, enter two-digit set code you wish to program followed by two 6s. The “66” is the identification code for individual programming of departments and PLUs. Then press okey.

4 You can skip this step if you program in departments 01 through 25. If you wish to program in departments 26

through 50, press DEPT key.

SHIFT/

DEPT#

5 Referring the following table, enter program code and press the department key in which you wish to set.

6 If you wish to set the same function in another department, press the corresponding dept. key.

7 Repeat steps 4 and 5 to set another function in another department.

8 Press okey to complete the program.

Operation

>▪▪▪▪▪>F 3o

BB66o

(set code)

DEPT

SHIFT/

DEPT#

123#

This example is for linking dept. 03 to item group 123 assuming set code 11 has been

entered in step 3 and DEPT key is not pressed

SHIFT/

DEPT#

in step 4.

$

This example is for setting the same linking group in dept. 04.

o

features Useful

E-81